657787-B21 - HPE Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class

Product Features

• Simplify the Server Edge with 95% Consolidation and Faster Deployment of Network Connections
  The HPE Cisco B22HP Fabrc Extender with 16 FET for BladeSystem c-Class reduces up to 95% of hardware needed to connect servers to networks. Using only two of these modules to connect an enclosure of HP server blades to both data and storage networks, you can reduce multiple switches, cards and cables.
  It gives you the advantage of 4:1 consolidation of interconnect equipment. Each HPE Cisco B22HP Fabrc Extender with 16 FET for BladeSystem c-Classcan replace up to three 10GbE based switches and one 8 Gb Fiber Channel switch in an HP BladeSystem enclosure.
  Reduces networking TCO at the server edge by saving up to 65% on equipment. The FlatSAN solution allows connecting directly to HP 3PAR StoreServ Storage and thereby reduces 86% fewer components, lowers latency by 55% and provisions 2.5x faster.
  Simplifies connection management with wire-once, then add, move, and change network connections to 1000's of servers in minutes versus days from one console without affecting your LAN and SAN.
• Flexibly Configure of Your Network and Storage Connections
  The HPE Cisco B22HP Fabrc Extender with 16 FET for BladeSystem c-Class provides one flexible interconnect interface to any network. One device supports most common data center networks protocols like; Ethernet, Fibre Channel (FC), FCoE and iSCSI.
  Fine-tune the performance of each data and storage connection to meet the needs of each of your virtual machines and targeted workloads.
  Optimize the hypervisor I/O requirements with Flex-10 and Flex-20 adapters. With two modules you can provide six FlexNICs and two FlexHBAs connections to each server, delivering a best practice network configuration for most hypervisors.
  Connect to servers using full hardware offload of iSCSI and FCoE protocol processing minimizing the impact on host CPU performance to increase storage connection performance.
  Ultra-fast 10/20GbE server-to-server performance: Perform ultra-fast communication between virtual server hosts and moved and recoveries with hardware based 10/20GbE performance.
• Upgrade Your Network with Investment Protection and No Process Changes
  The HPE Cisco B22HP Fabrc Extender with 16 FET for BladeSystem c-Class is 100% compatible with current networks: Seamless connection to existing industry standard data and storage networks avoids having to replace each piece of equipment.
  One standard for all connection needs: One HPE Cisco B22HP Fabrc Extender with 16 FET for BladeSystem c-Class meets any data and storage connection need with license-free, multi-protocol support for Ethernet, Fibre Channel (FC), Fibre Channel over Ethernet (FCoE) and Accelerated iSCSI connections.
  Built on proven HP BladeSystem technology and requires no changes to the HP BladeSystem c-Class Enclosure components.
  Maintain current IT processes with direct uplink connections to LANs and SANs to maintain your current IT practices, unlike other solutions that reroute SAN traffic to the LAN.