Support Center
Free Shipping
On all orders shipping to the continental US
Free Technical Support
Pre or post order - we are here to help answer questions
Free Assembly
Hardware integration, firmware updates & burnin
Free Solution Architecting
Consult an expert to ensure you get the right product the first time
700763-B21 - HP FlexFabric 20Gb 2-port 650FLB Adapter
MFG Part
700763-B21
Inventory
0
MSRP
$539.00
Condition
New
Availability
Available
Standard Warranty
Limited warranty - 1 year
What if you could accelerate IT services, increase data center efficiency and double your bandwidth without doubling your costs and complexity? The HPE FlexFabric 20Gb 2-port 650FLB Adapter is installed in the FlexibleLOM socket prior to installing additional Mezzanine adapters. The adapter provides Tunnel Offload for efficient overlay networking to increase VM migration flexibility and network scale with minimal impact to server performance. Traditional layer 2 networks limit mobility and scale of virtualized and multi-tenant workloads. When connected to HPE Virtual Connect FlexFabric-20/40 F8 Modules, the FlexFabric 20Gb 2-port 650FLB Adapter provides 20GbE performance and it can also provide 10GbE performance when connected to HPE 6125XLG Ethernet Blade Switch.
Key Selling Points
- The HPE FlexFabric 20Gb 2-port 650FLB Adapter is specifically designed for HPE ProLiant Server Blade. It is a FlexibleLOM card which cost-effectively doubles server I/O bandwidth and avoids bottlenecks both today and in the future.
- The HPE FlexFabric 20Gb 2-port 650FLB Adapter uses Tunnel Offload and a 2x bandwidth improvement to take full advantage of overlay networking.
Product Features
- Lower Costs and Deliver Faster Services by Converging FCoE with LAN Traffic on a Single Wire
The HPE FlexFabric 20Gb 2-port 650FLB Adapter is specifically designed for HPE ProLiant Server Blade. It is a FlexibleLOM card which cost-effectively doubles server I/O bandwidth and avoids bottlenecks both today and in the future.
Simplify the infrastructure by reducing 50% of the hardware (compared to 10 Gb adapters), lowering operational costs and acquisition costs.
The industry's first product to converge FCoE with LAN traffic on a single Ethernet wire.
Combining both the FlexibleLOM and Mezzanine adapters in a single HPE BladeSystem ProLiant Server can provide up to 80 Gb/s of converged bi-directional Ethernet bandwidth. - Improve Network Virtualization Performance and Scale with Tunnel Offload
The HPE FlexFabric 20Gb 2-port 650FLB Adapter uses Tunnel Offload and a 2x bandwidth improvement to take full advantage of overlay networking.
Increase I/O throughput up to 129%, and reduce CPU and power consumption by 46% and 122% respectively using Tunnel Offload.
Increase the scale of VMs/VLANs beyond the traditional limit of 4,096.
Simplify network services provisioning.
Provide up to a 4x improvement in small packet performance.
Specifications
| General | |
|---|---|
| Device Type | Network adapter |
| Form Factor | Plug-in card |
| Interface (Bus) Type | PCI Express 3.0 x8 |
| Networking | |
| Ports | 20 Gigabit Ethernet x 2 |
| Connectivity Technology | Wired |
| Data Link Protocol | 20 Gigabit LAN |
| Data Transfer Rate | 20 Gbps |
| Network / Transport Protocol | TCP/IP |
| Remote Management Protocol | SNMP |
| Features | VLAN support, wake on LAN (WOL), full duplex mode, Jumbo Frames support, PXE support, Large Send Offload (LSO), UEFI support, Single Root I/O Virtualization (SR-IOV), TCP Segmentation Offload (TSO), QoS tagging, Extended Message-Signaled Interrupts (MSI-X), TCP/IP checksum offload, RDMA over Converged Ethernet (RoCE) |
| Compliant Standards | IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3ae, IEEE 802.1ab (LLDP), IEEE 802.3ap, IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qbg |
| Processor / Memory | |
| Processor | 1 Emulex |
| Expansion / Connectivity | |
| Expansion Slots | 1 x FlexibleLOM |
| Interfaces | 2 x 20Gb Ethernet |
| Miscellaneous | |
| Compliant Standards | FCC Class A certified, UL, VCCI, ICES-003, CISPR 22, FCC CFR47 Part 15, IEC 60950-1, EN 60950-1, WEEE, RoHS, BSMI CNS 13438, KN22, KN24, EN55022:2010, EN55024:2010, MSIP, UL 60950-1:2007 |
| Power | |
| Power Consumption Operational | 7.6 Watt |
| Software / System Requirements | |
| Software Included | Drivers & Utilities, HP Systems Insight Manager (HP SIM) |
| OS Required | Microsoft Windows Server 2008, Microsoft Windows Server 2012, Microsoft Windows Server 2012 R2, Microsoft Windows Server 2008 R2 SP1 (64-bits), Red Hat Enterprise Linux 6.5, Red Hat Enterprise Linux 7, Red Hat Enterprise Linux 6.6, Red Hat Enterprise Linux 7.1, SuSE Linux Enterprise Server 11 SP3 x64 Edition, SUSE Linux Enterprise Server 12 x64 Edition, VMware ESXi 5.1 update 3, VMware ESXi 5.5 update 2, Citrix XenServer 6.5 |
| Manufacturer Warranty | |
| Service & Support | Limited warranty - 1 year |
| Environmental Parameters | |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 131 °F |
| Humidity Range Operating | 15 - 80% (non-condensing) |
| Compatibility Information | |
| Designed For | HPE ProLiant BL460c Gen10, BL460c Gen9, BL460c Gen9 Base, BL460c Gen9 Entry, BL460c Gen9 Performance, WS460c Gen9 Graphics, WS460c Gen9 Graphics Expansion |
