Support Center
Free Shipping
On all orders shipping to the continental US
Free Technical Support
Pre or post order - we are here to help answer questions
Free Assembly
Hardware integration, firmware updates & burnin
Free Solution Architecting
Consult an expert to ensure you get the right product the first time
700767-B21 - HP FlexFabric 20Gb 2-port 650M Adapter
MFG Part
700767-B21
Inventory
0
MSRP
$1,099.00
Condition
New
Availability
Available
Standard Warranty
Limited warranty - 1 year
What if you could accelerate IT services, increase data center efficiency and double your bandwidth without doubling your costs and complexity? The HPE FlexFabric 20Gb 2-port 650M Adapter can be installed together with FlexibleLOM adapters for ProLiant Gen9 Server Blades to provide additional features. The adapter provides Tunnel Offload for efficient overlay networking to increase VM migration flexibility and network scale with minimal impact to server performance. Traditional layer 2 networks limit mobility and scale of virtualized and multi-tenant workloads. When connected to HPE Virtual Connect FlexFabric-20/40 F8 Modules, the FlexFabric 20Gb 2-port 650M Adapter provides 20GbE performance and it can also provide 10GbE performance when connected to HPE 6125XLG Ethernet Blade Switch.
Key Selling Points
- The HPE FlexFabric 20Gb 2-port 650M Adapter is specifically designed for HPE ProLiant Server Blade. It is a mezzanine adapter which cost-effectively doubles server I/O bandwidth and avoids bottlenecks both today and in the future.
- The HPE FlexFabric 20Gb 2-port 650M Adapter uses Tunnel Offload and a 2x bandwidth improvement to take full advantage of overlay networking.
Product Features
- Lower Costs and Deliver Faster Services by Converging FCoE with LAN Traffic on a Single Wire
The HPE FlexFabric 20Gb 2-port 650M Adapter is specifically designed for HPE ProLiant Server Blade. It is a mezzanine adapter which cost-effectively doubles server I/O bandwidth and avoids bottlenecks both today and in the future.
Simplify the infrastructure by reducing 50% of the hardware (compared to 10 Gb adapters), lowering operational costs and acquisition costs.
The industry's first product to converge FCoE with LAN traffic on a single Ethernet wire.
Combining both the FlexibleLOM and Mezzanine adapters in a single HPE BladeSystem ProLiant Server can provide up to 80 Gb/s of converged bi-directional Ethernet bandwidth. - Improve Network Virtualization Performance and Scale with Tunnel Offload on a 20GbE Adapter
The HPE FlexFabric 20Gb 2-port 650M Adapter uses Tunnel Offload and a 2x bandwidth improvement to take full advantage of overlay networking.
Increase I/O throughput up to 129%, and reduce CPU and power consumption by 46% and 122% respectively using Tunnel Offload.
Increase the scale of VMs/VLANs beyond the traditional limit of 4,096.
Simplify network services provisioning.
Provide up to a 4x improvement in small packet performance.
Specifications
| General | |
|---|---|
| Device Type | Network adapter |
| Interface (Bus) Type | PCI Express 3.0 x8 |
| PCI Specification Revision | PCIe 3.0 |
| Networking | |
| Ports | 20 Gigabit Ethernet x 2 |
| Connectivity Technology | Wired |
| Data Link Protocol | FCoE, 20 Gigabit LAN |
| Data Transfer Rate | 20 Gbps |
| Network / Transport Protocol | TCP/IP, UDP/IP |
| Remote Management Protocol | SNMP |
| Features | Full duplex capability, TCP/IP offloading, Quality of Service (QoS), Jumbo Frames support, teaming support, PXE support, Large Send Offload (LSO), Receive Side Scaling (RSS), Single Root I/O Virtualization (SR-IOV), TCP Segmentation Offload (TSO), checksum offload support, Extended Message-Signaled Interrupts (MSI-X), UDP/IP offloading |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3ae, IEEE 802.3p, IEEE 802.3ap |
| Miscellaneous | |
| Compliant Standards | FCC Class A certified, UL, CISPR 22 Class A, BSMI CNS 13438 Class A, EN 60950, ICES-003, EN55024, FCC Part 15, WEEE, RoHS, VCCI V-3 Class A ITE, KN24, KN22 Class A, EN55022:2006 Class A |
| Software / System Requirements | |
| OS Required | Microsoft Windows Server 2008 (32/64-bits) SP2, SuSE Linux Enterprise Server 11 SP2, Microsoft Windows Server 2012, Microsoft Windows Server 2008 R2 (32/64-bits), Red Hat Enterprise Linux 5.9, Citrix XenServer 6.1, Microsoft Windows Server 2012 R2, Red Hat Enterprise Linux 6.4, VMware vSphere 5.5, Oracle Solaris x64 11, SuSE Linux Enterprise Server 11 SP3, Red Hat Enterprise Linux 6.5, Oracle Solaris 10 update 10, Red Hat Enterprise Linux 5.10, VMware ESXi 5.0 update 3, VMware ESXi 5.1 update 2 |
| Environmental Parameters | |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 131 °F |
| Humidity Range Operating | 10 - 90% (non-condensing) |
| Compatibility Information | |
| Designed For | HP 6125XLG ¦ HPE 6125XLG Ethernet Blade Switch ¦ HPE ProLiant BL460c Gen10, WS460c Gen9 Graphics, WS460c Gen9 Graphics Expansion |
